Cookies By using our website, you explicitly agree to the use of cookies and the usage of your personal data to access our website for the purpose of improving our online content. This consent also includes the use by us of service providers, such as Google Analytics, and the sharing of data with these for this purpose. You can find further information in our Privacy Policy. This site uses cookies in order to improve your user experience. For more information (including an opt-out), see details.
Menu

Which adhesives and sealants should be used to apply the EPDM?

EPDM lijmsystemen
Only HERTALAN® adhesives are suitable for installing HERTALAN® EPDM systems.

For installing our DPC systems you can work with three adhesive systems:

 

/ hertalan ks96 adhesive sealant;

/ hertalan ks137 contact adhesive;

/ hertalan ks205 sprayable conatct adhesive

HERTALAN KS96 ADHESIVE SEALANT

Apply at least one bead approximately Ø 7 mm onto the surface to be bonded. The number of strips depends on the local situation. If an EPDM strip is wider then 300mm and / or thicker than 1.0 mm, a minimum of two beads should be applied. For other installation details, please refer to our guidelines.

HERTALAN KS137 CONTACT ADHESIVE

The ks137 is applied two-sided onto both the substrate surface and the EPDM membrane. This can be completed with a round brush or a fine roller. The adhesive is required to be touch dry before the EPDM is applied to the substrate. Once pressed together the areas should be compressed with a silicone roller.

 

For other installation details please refer to our guidelines.

HERTALAN KS205 SPRAYABLE CONTACT ADHESIVE

The ks205 is applied two-sided onto both the substrate surface and the EPDM membrane with a closed spraying system. The adhesive is required to be touch dry before the EPDM is applied to the substrate. Once pressed together the areas should be compressed with a silicone roller. For other installation details please refer to our guidelines.